Automated Mapping Drone
The DJI Matrice 3D is built for uncrewed, dock-based survey operations — combining a 20MP wide-angle camera, built-in RTK, and 50-minute flight time in a compact IP54-rated airframe. Paired with DJI Dock 2 or Dock 3, it takes off, maps, returns, recharges, and repeats entirely without a pilot on-site. The backbone of any automated survey workflow.
Autonomous Precision Mapping — On Demand
The DJI Matrice 3D was engineered from the ground up for automated, dock-based survey operations. Paired with DJI Dock 2 or Dock 3, it can take off, complete a full mapping mission, return, recharge, and repeat — entirely without a pilot on-site. For survey teams managing large project areas, repeat flights, or remote monitoring programs, this changes what's operationally possible.
At the core is a dual-camera system: a 20MP wide-angle with a 4/3" CMOS sensor and mechanical shutter for photogrammetric mapping, and a 12MP telephoto for close-range detail and structure inspection. The built-in RTK module ensures every image is geo-tagged with centimetre-level accuracy — no GCPs required for most workflows.
📡
Built-In RTK Module
Real-time kinematic positioning baked into the airframe — no external module required. Achieve ±3 cm accuracy on every flight, enabling GCP-free mapping workflows that save hours of ground setup per project.
📷
Dual-Camera Mapping System
The 20MP wide-angle with 4/3" CMOS and mechanical shutter is purpose-built for 1:500-scale photogrammetric maps. The 12MP telephoto adds detail capture for asset verification and structure inspection at distance.
🏠
Dock 2 & Dock 3 Compatible
Designed for the compact footprint of DJI Dock 2, and fully compatible with Dock 3. Deploy a fully autonomous survey station at any site — launch, map, return, charge, repeat — zero manual intervention.
🛡️
IP54 All-Weather Durability
Rated IP54 for dust and water resistance, handles wind speeds up to 26.8 mph (12 m/s) during operation. Built to keep flying when field conditions get challenging.
🔄
Six-Direction Obstacle Sensing
Omnidirectional detection and APAS automatic avoidance protects the aircraft during autonomous missions — even around structures and complex terrain, without interrupting the mission.
🖥️
FlightHub 2 Integration
Manage missions, monitor live feeds, schedule automated flights, and review data from DJI FlightHub 2. Centralised fleet management for enterprises running multiple Dock units across sites.
🏗️
Construction Surveys
Schedule daily site overflights directly from the dock — track cut/fill volumes, progress photos, and site conditions automatically with no crew deployment needed.
🗺️
Topographic Mapping
Generate 1:500 high-precision topographic maps for civil engineering, land development, and infrastructure planning — centimetre accuracy across large acreages.
⚡
Utility Corridor Inspection
Automate recurring inspections of power lines, pipelines, and transmission corridors. Dock at a remote station and fly scheduled patrols without dispatching field crews.
🌿
Agriculture & Land Management
Monitor crop health, track vegetation change, and support precision agriculture programs with automated weekly mapping flights from a permanent dock installation.
✓DJI Matrice 3D Aircraft ×1
✓CW Propellers (Pair) ×2
✓CCW Propellers (Pair) ×2
✓Propeller Screws ×8
✓Gimbal Protector ×1
✓microSD Card (pre-inserted)
✓Type-C Data Cable ×1
✓Quick Start Guide
Note: DJI Dock 2 / Dock 3, Intelligent Flight Battery, and DJI RC Pro Enterprise controller sold separately.
Does the Matrice 3D work without the DJI Dock?
The Matrice 3D is optimised for dock-based autonomous operations with DJI Dock 2 or Dock 3, but it can also be flown manually using the DJI RC Pro Enterprise controller (sold separately). For teams wanting both automated and piloted capabilities from one airframe, it delivers both.
What's the difference between the Matrice 3D and Matrice 3TD?
The Matrice 3D carries a dual visible-light camera system (20MP wide + 12MP telephoto) designed for photogrammetric mapping and inspection. The Matrice 3TD replaces the wide camera with a radiometric thermal camera, making it ideal for search and rescue, electrical inspection, and thermal anomaly detection. If your primary need is mapping and 3D modelling, the 3D is the right choice.
Do I need GCPs with the built-in RTK?
In most mapping workflows, no. The built-in RTK module — when connected to a network RTK source or a DJI D-RTK 2 base station — provides centimetre-level geotagging accuracy that eliminates the need for ground control points. For the highest possible absolute accuracy, a small number of checkpoints can be used to verify results.
What software does the Matrice 3D work with?
The Matrice 3D integrates natively with DJI FlightHub 2 for mission planning, fleet management, and live monitoring. Imagery is compatible with all major photogrammetry platforms including DJI Terra, Pix4D, Agisoft Metashape, and RealityCapture. RTK output files work with Trimble Business Center and Leica Infinity.
Is the Matrice 3D FAA Part 107 compliant?
Yes, the Matrice 3D is suitable for FAA Part 107 commercial operations. Pilots must hold a valid Remote Pilot Certificate. For BVLOS dock-based operations, a separate FAA waiver is required. Our team can advise on BVLOS compliance pathways.
Is DJI Care Enterprise available for the Matrice 3D?
Yes. DJI Care Enterprise covers flyaway, collision damage, and water damage with rapid replacement options — keeping your dock operation running with minimal downtime. We offer DJI Care Enterprise plans at time of purchase.
