The DJI Matrice 4D is a next-generation enterprise drone built for professional mapping, precision inspection, and large-scale site surveys. Equipped with a triple-camera payload — 4/3" CMOS wide-angle with mechanical shutter, 48MP medium tele, and 48MP tele — plus an integrated laser rangefinder, it captures the detail and accuracy your workflow demands. Fully compatible with DJI Dock 3 for autonomous operations, or fly manually with the RC Plus 2 controller.
Triple-Camera Payload4/3" Mechanical Shutter48MP Tele CameraLaser RangefinderHigh-Precision MappingDJI Dock 3 ReadyIP54 RatedRC Plus 2 CompatibleRTK ReadyAutonomous Missions
Built for Precision. Engineered for Scale.
The Matrice 4D is purpose-built for surveyors, engineers, and inspection professionals who need accurate, repeatable aerial data at speed. Its 4/3" CMOS wide-angle camera with mechanical shutter eliminates rolling shutter distortion — critical for photogrammetry and orthomosaic mapping. The 48MP tele camera can read signs and detect surface defects from over 250 meters away, while the medium tele locks onto fine detail at mid-range. The integrated laser rangefinder adds real-world measurement data to every mission, straight out of the box.
Triple-Camera Payload — Every Shot, Every Detail
📷
Wide-Angle Camera
✓ 4/3" CMOS Sensor
✓ 20MP Effective Pixels
✓ Mechanical Shutter
✓ ~24mm Equiv. Focal Length
✓ 4K/60fps Video
✓ Ideal for Mapping & Ortho
🔭
Medium Tele Camera
✓ 1/1.3" CMOS Sensor
✓ 48MP Effective Pixels
✓ f/2.8 Aperture
✓ ~70mm Equiv. Focal Length
✓ Pin & crack detection at 10m
✓ Substation instrument reading
🔬
Tele Camera
✓ 1/1.3" CMOS Sensor
✓ 48MP Effective Pixels
✓ f/2.8 Aperture
✓ ~168mm Equiv. Focal Length
✓ Reads signs from 250m+
✓ 80° upward gimbal tilt
📡
Laser Rangefinder
Measures distances up to 1,800 m at 1 Hz, with oblique incidence capability. Pairs with the camera payload to deliver real-time dimensional data during inspection missions — no additional hardware required.
Fully Autonomous with DJI Dock 3
Deploy the Matrice 4D from a DJI Dock 3 base station for fully automated, scheduled flights with no operator on-site. Trigger mapping missions remotely, collect data, and have the drone return and recharge automatically. When a pilot is needed, the RC Plus 2 controller provides full standalone capability for manual operations.
What Professionals Use the Matrice 4D For
The M4D handles the widest range of enterprise mapping and inspection missions:
🗺️ Photogrammetry & Mapping
The mechanical shutter wide-angle camera eliminates rolling shutter artifacts, producing sharp, distortion-free orthomosaic maps and 3D models.
🏗️ Infrastructure Inspection
Inspect bridges, towers, pipelines, and substations using the medium tele and tele cameras to identify cracks, corrosion, and defects from a safe distance.
⚡ Utility & Energy
Read instrument panels at substations, inspect solar farms, and survey power line corridors with the 48MP tele camera from over 250 meters away.
🌊 Water & Maritime
Survey water conservancy infrastructure, coastal zones, and maritime assets with reliable IP54-rated operation in challenging environmental conditions.
🚧 Construction Monitoring
Track site progress, produce volume reports, and conduct routine inspections autonomously with Dock 3 scheduled missions.
Full Technical Specifications
| Category |
Specification |
| Max Flight Time |
42 Minutes |
| Max Speed |
21 m/s (Sport Mode) |
| Video Link Range |
20 km (O4 Enterprise) |
| IP Rating |
IP54 (Dust & Water Resistant) |
| Aircraft Weight |
1,850 g (with battery & propellers) |
| Dimensions |
377.7 × 416.2 × 212.5 mm |
| Wide Camera |
20MP, 4/3" CMOS, Mechanical Shutter, ~24mm equiv |
| Medium Tele Camera |
48MP, 1/1.3" CMOS, f/2.8, ~70mm equiv |
| Tele Camera |
48MP, 1/1.3" CMOS, f/2.8, ~168mm equiv |
| Laser Rangefinder |
1,800 m range at 1 Hz |
| Dock Compatibility |
DJI Dock 3 (fully autonomous) |
| Controller |
RC Plus 2 (standalone operation) |
| Max Ascent Speed |
6 m/s (Normal) / 10 m/s (Sport) |
| GNSS |
GPS+GLONASS+Galileo+BeiDou |
| Obstacle Sensing |
Omnidirectional |
What's in the Box
📦 DJI Matrice 4D Aircraft
📦 RC Plus 2 Remote Controller
📦 Intelligent Flight Battery (×2)
📦 Battery Charging Hub
📦 Power Adapter & Cable
📦 Propellers (×4 pairs)
📦 Gimbal Protector
📦 Storage Case
📦 Screwdriver
📦 Quick Start Guide
✅
Authorized DJI Dealer
Official US DJI reseller
🚚
Free US Shipping
On all orders, ships fast
🛠️
Expert Support
Pre-sale advice from drone pros
🔒
Secure Checkout
Safe & encrypted payment
Frequently Asked Questions
What is the difference between the Matrice 4D and 4TD?
The Matrice 4D is optimised for mapping, surveying, and visual inspection with its triple-camera payload and mechanical shutter. The 4TD adds an infrared thermal camera and NIR auxiliary light, making it better suited for thermal inspections, emergency response, and night operations.
Does the Matrice 4D support RTK?
Yes. The M4D is RTK-ready, supporting centimeter-level positioning accuracy when paired with a compatible RTK base station or network, making it suitable for survey-grade mapping workflows.
What is the wide-angle camera's mechanical shutter for?
The mechanical shutter prevents rolling shutter distortion during fast flight — a critical feature for photogrammetry and aerial mapping, where even slight distortion can affect the accuracy of orthomosaic maps and 3D models.
How far away can the tele camera detect detail?
The 48MP tele camera (~168mm equivalent focal length) can read text on signs from over 250 meters and detect fine surface defects and cracks from significant distances, reducing the need to fly close to structures.
Can the Matrice 4D operate without DJI Dock 3?
Yes. When paired with the RC Plus 2 controller, the M4D operates as a fully manual drone — no dock required. Dock 3 is optional and adds autonomous scheduled mission capability.
Is the Matrice 4D waterproof?
The M4D is rated IP54, making it resistant to dust ingress and water splashes from any direction. It is suitable for field operations in light rain and dusty environments.
